Monthly Archives: September 2017

If Your Wheels Produce Clunking Noise, It’s High Time to Start Worrying!

Most car owners are sure their cars cannot talk. But if you are attentive enough and learn to interpret your vehicle’s signals, you’ll find out that most issues can be communicated and solved this way. For example, when your brakes screech, you inspect brake pads for the signs of wear. If something squeals from under the hoof, you get ready for the replacement of the accessory belt. Another type of sounds that often perplex drivers is clunks heard from the vehicle’s bottom. If such sound is accompanied with bangs that you can physically feel through the floor, it’s high time to get your car inspected professionally. The UK’s dealer of wheel parts explains how clunking noise can be interpreted and addressed.

Why are clunks worth your attention?

Of course, you can ignore lots of uncomfortable things until they threaten your life, but clunks aren’t just uncomfortable. They are able to impact handling and steering in the way that you become unable to control your vehicle. They can point to a serious issue that can eventually lead to an accident.

Types of clunking sounds and what hides behind them

Light clunks/pops. If you hear such sounds when you heat bumps, you should suspect shock absorbers. Inspect them for the signs of wear. Their task is to soften the ride by acting as a mediator between wheels and your car’s body. If you ignore the issue, handling and riding comfort can be seriously affected. Worn shock absorbers reduce the contact between wheels and the road’s surface, which translates into a much harsher ride, and compromise braking and steering.

Grinding sounds (in succession). Noticed when you turn your steering wheel, this kind of sounds can point to the strut mounts wear. The noise is produced by bearings that fail and complicate steering. If you ignore the issue, you’ll have to put more efforts while steering, and this extra strain wears out not only you but also the steering system.

Rhythmic clicking/popping sounds. If noticed while you make sharp turns at low speeds (for example, while parking), such noise can mean that the rear differential’s effectiveness was compromised. It can be a result of everything from worn-out components to the contamination of differential fluid. If you ignore the issue, expect a reduced fuel efficiency, bad traction and, in the worst scenario, the differential failure causing a lock-up of the rear wheels.

Sharp popping/banging sounds. If you physically feel bangs coming from the floor every time you hit bumps or just drive over uneven terrain, the problem can be in the ball joints wear. Ball joints are the components of the suspension system that are responsible for the connection between suspension and steering systems. If ignored, this issue can lead to the wheel separation from the car’s suspension (looks like front wheels are torn out).

4 Remarkable Tips of Assessing the Condition of A Used Car

Are you planning to buy a used car? Are you nervous or worried about buying a car that turns out to be a lemon?  Maybe you have a friend with a terrible story about their junker sold to them by an overly aggressive salespeople.

Here are 4 Tips to help take some of the mystery out of buying a used car and eliminate some of that stress.  Before we get started, here is the good news; there area a lot of good used cars out there and not all used car dealers are like you see in the movies.

Simply Follow these tips:

  1.        Research Used Car Dealership in Your Area

While you might want to run right out and start driving cars at any old lot, it is probably a good idea to research the reputable dealers in your area first. Start by asking for referrals from friends or relatives.  Next do some research online by checking reviews, reading their websites, or asking your contacts on social media for help.

  1.        Find out the vehicle history

After finding the car of your choice, don’t forget that history is relevant. What are the service records? What about the ownership? If that car had multiple owners in a short time, that could be a red flag or at least warrant more questions from the current seller. You never know why people are selling a car, but asking questions is always a good idea.

  1.         Inspect the car during the daylight

Did you know that it is wise to check a car during the day? Some matters such as parts that were repainted can be seen well during the daytime. You might also notice other damaged parts during the day more easily than during the night.

Visually check the fluid levels, date of the battery, wiring condition, muffler, tires, etc. If you are not mechanical, it is wise to have a reliable auto mechanic perform a pre-purchase check of the primary systems and overall condition of a car.  Keep in mind, most used cars normally has some small issues.  You need get informed and then decide on which ones you can live with and which might be a deal breaker.

  1. Remember to check the legal records for the car

Records about the car could shed even more light about the car. Check the current vehicle registration for accuracy with the owners name, address, VIN, etc. Review the current title and make sure it matches the registration, that there are no leans and take notice of the date of ownership.  Usually these documents will be in-order when working with a dealership, but if you are purchasing from a private individual, these are very important items to review.


The above tips might be simple but could save you from many problems down the road. Despite the unknown and fear of buying a lemon, there is hope in finding a top-notch quality car by following the above tips.

If you live in the Wayland Michigan area, click here to learn about Broadmoor Motors Group and the quality cars they have to offer. You can also visit their used car dealership at Broadmoor Motors Wayland, 159 N Main St, Wayland, MI 49348 – (269) 397-2400.